Please use this identifier to cite or link to this item: https://repo.btu.kharkov.ua//handle/123456789/3171
Title: Дослідження змикання дійкової ґуми адаптивного доїльного стакана
Other Titles: Study of the closure of a linear adaptive milking glass
Authors: Дмитрів, І. В.
Красниця, Б. С.
Keywords: сенсор тиску;генератор імпульсів;вакуумметричний тиск;доїльний стакан;дійкова ґума;pressure sensor;pulse generator;vacuum pressure;milking glass;linear
Issue Date: 2019
Publisher: ХНТУСГ
Citation: Дмитрів І. В., Красниця Б. С. Дослідження змикання дійкової ґуми адаптивного доїльного стакана.Технічний сервіс агропромислового, лісового та транспортного комплексів. 2019. № 17. С. 43-49.
Series/Report no.: Технічний сервіс агропромислового, лісового та транспортного комплексів;№ 17
Abstract: В статі наведено аналіз результатів досліджень впливу дійкової ґуми на дійку вимені корови в процесі доїння. Проаналізовано, що визначення впливу критичного тиску дійкової ґуми на дійку лише в такті стиску не дозволяє достатньо повно описати динаміку процесу стиску дійки дійковою ґумою. Обґрунтовано необхідність дослідження переміщення стінок дійкової ґуми в процесі стиску. Наведено рівняння регресії, що характеризує залежність величини вакуумметричного тиску змикання дійкової ґуми Рзм адаптивного доїльного стакана від вакуумметричного тиску Рі та діаметра перепускного отвору dпер. Проведено перевірку значимості коефіцієнтів рівняння регресії. Зростання вакуумметричного тиску від 36 до 48 кПа та збільшення діаметрів перепускного отвору підвищує тиск змикання дійкової ґуми у значних межах. За вакуумметричного тиску у 36 кПа для всіх значень діаметрів перепускного отвору спостерігається стабілізація тиску змикання дійкової ґуми.
The article analyzes the results of studies of the effect of liner on the cow's udder during milking. It is analyzed that the determination of the effect of the critical pressure of the liner on the cow teat only in the compression stroke does not sufficiently describe the dynamics of the process of compression the cow teat of liner. The necessity to study the displacement of the walls of the liner during compression is substantiated. A regression equation to characterize the dependence of the vacuum pressure closing value of the liner Рзм of the adaptive milking glass on the vacuum pressure Рі and the diameter of the bypass hole dпер is presented. The significance of the regression equation coefficients was checked. Increasing the vacuum pressure from 36 to 48 kPa and increasing the diameters of the bypass opening increases the pressure of closing the liner within sufficiently large limits. At vacuum pressure at 36 kPa for all values of the diameters of the bypass hole, there is a stabilization of the tire pressure of the liner.
URI: https://repo.btu.kharkov.ua//handle/123456789/3171
Appears in Collections:№ 17

Files in This Item:
File Description SizeFormat 
7.pdf747.63 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.